SCALABLE, FLEXIBLE, ACCURATE GPS FOR SITE POSITIONING
Connect and equip the office, site and vehicles with accurate positioning, consistent digital design information and the ability to locate, measure and record information.
GPS FOR SITE POSITIONING
TAKE CONTROL OF THE ENTIRE SITE.
Trimble GPS for Site positioning can be used as a rover for site measurement and setting out, or as a base station for site measurement and machine control operations. Because the GPS receiver, GPS antenna, radio, radio antenna and battery are integrated into one housing, you don’t have to deal with cables and multiple components.
SPS986 GNSS SMART ANTENNA
The Trimble® SPS986 GNSS Smart Antenna is one of the smallest and toughest GNSS receiver on the market. It combines unprecedented strength and durability into a compact form that is easy to use and virtually indestructible.
The ultra-rugged Trimble SPS986 GNSS Smart Antenna offers unmatched reliability for both construction site positioning. Ideal for use on small and large sites, the SPS986 can serve as a GNSS rover or as a base station for other GNSS operations including machine control.
They provide the highest possible degree of accuracy for construction site positioning, setting out, measurement and machine control — all from the same instrument. With Bluetooth® for cable free operation and optional machine control mode.
Flexibility – easily move from carrying case to range pole, tripod, T-bar or vehicle with a single click.
ProPoint GNSS technology – uses all available signals to provide survey-grade positioning in many areas where other GNSS systems can’t.
Trimble xFill™ technology – expands site productivity by allowing short excursions into locations where GNSS corrections were not previously available.
Scalability – buy only what you need.
Determine cut/fill on a range pole, utility vehicle or truck.
Record tilt data when taking measurements.
Stake out site or road features, utilities, daylight lines and side slopes.
Measure progress and calculate material stockpile volumes.
Carry out as-built measurements, grade checks and thickness checks.
The lightweight and compact Trimble® SPS785 GNSS Smart Antenna is an entry-level, fully capable GNSS receiver, that is ideal for construction surveyors, earthworks supervisors or foremen.
The SPS785 enables users to quickly check site levels, navigate to points, easily execute simple positioning tasks and record features with attributes, pictures and volumes. It is ideal for use on small and large job sites and can serve as a precise GNSS rover or as a base station for other GNSS operations including machine control.
Utilising the unique all-signals tracking and processing Z-Blade GNSS-centric technology the SPS785 provides reliable measurements and high accuracy.
USERS OF THE SPS785 BENEFIT FROM:
2W UHF radio – which is user-installable.
Support for all constellations – with full utilisation of signals from all 6 GNSS systems: GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS.
Enhanced – GNSS-centric algorithm.
Fully independent GNSS signal tracking – plus optimal data processing.
UHF radio options – 240-channel, 6G, ASIC Internal TRx.
Patented Z-Blade technology – for optimal GNSS performance.
Long Range Bluetooth – built in
APPLICATIONS Smaller construction sites or combined with GNSS on larger sites.
Tasks where the accuracy requirements are tight.
Measuring dangerous or inaccessible locations.
Automated target measurement for movement of ground or buildings that could be affected by construction activities.
The Trimble® SPS855 GNSS Modular Receiver gives you the flexibility to perform all your construction site measurements. Trimble SPS855 Modular GNSS Receiver is a fully upgradable receiver that can be configured in a variety of ways. Simply purchase the receiver that you need today and upgrade as your needs change.
As a permanent or semi-permanent base station, it provides GNSS corrections for site measurements and machine control. As a rover it can move easily from a site supervisor truck to a pole mount for grade checking, site measurement and set out
THE ADVANTAGES OF USING THE SPS855 ARE:
Highly flexible base or rover – for construction site measurement.
Integrated radio option – for base and rover tasks.
Rapid daily base station setup – with a single button push.
Internet enabled base station – via ethernet or SNM940 Connected Site® Gateway.
Integrated battery – that also acts as a UPS power supply.
Base station only
Rover only with SBAS, Location, or Precision Real-Time Kinematic (RTK) accuracy
Flexible base or rover with Precision RTK accuracy
The Trimble® SPS585 Smart Antenna is the ideal entry-level receiver for civil construction applications providing the flexibility to meet many construction site requirements. Ideal for site supervisors, engineers and inspectors, the SPS585’s cable-free operation means it can be easily mounted on a vehicle or survey pole.
The SPS585 is fully configured out of the box and requires no activation or base station setup. Full GNSS dual frequency tracking and positioning comes as standard along with Trimble’s xFill service.
THE SPS585 IS DESIGNED TO:
Access multi-constellation, GNSS satellites – for 10cm (0.33 ft) position accuracy.
Optional upgrades – to high precision rover available.
Utilise both Bluetooth – and Wi-Fi connectivity.
Use VRS networks, Internet Base Station Service (IBSS) – or Trimble’s CenterPoint RTX correction service.
Transition quickly from a vehicle to a pole – using a built-in magnetic mount.
Fill as standard – gives users the ability to maintain RTK precisions during temporary interruptions in RTK correction sources.
Show status – with an easy user interface.
Design interrogation for supervisors, engineers and foremen.
Vehicle mounted site supervisor applications.
Site positioning for environmental and geotechnical services.